5303918301 Garage Heater Kit for Frigidaire Electrolux Refrigerators PS900213

Description

Fixes the following symptoms:
...Refrigerator Won't Cool in Garage
...Freezer section too warm.
Installation step instructions
（
Before working on your appliance, make sure that it is unplugged.）
① Unplug the refrigerator from electrical oulet.
② Remove 4 screws holding control box to cabinet.
Unplug the Molex connector.
③
Remove 2 screws holding defrost timer to control box.
Pull back defrost timer.
④ Bend the heater into a U shape. Peel off the paper backing of heater.
⑤
Align heater holes with defrost timer mounting pegs. Place heater against control box and press down over full surface of heater.
⑥ Set defrost timer back into position and screw in place.
⑦ Unplug 2 leads from cold control(Orange and Black wires).
⑧ Plug orange lead to orange heater lead, then back onto cold control.
Plug black lead to blace heater lead, then back to cold control.
⑨ Reinstall cold control box by first plugging in Molex connector.
Screw control box back into refrigerator cabinet using 4 screws you removed ealier.
Plug refrigerator into electrical outlet.
⑩ Check out the installation video on YouTube and you'll find it very easy to install this refrigerator garage heater kit.
Please note:
❄
Non original part,but meets OEM standards.
❄
This heater kit will NOT work on Frigidaire refrigerators manufactured prior to 2001, on side-by-side or counter-depth models, or on models with electronic controls.
On May 7, 2022 at 09:00:30 PDT, seller added the following information: